LG 50PA6500 50-inch 1080p 600 Hz Plasma HDTV
Purchased this TV through amazon because of the price. I could not afford an LED this size so I went with the Plasma. The Plasma is not as bright as LED but bright enough for my needs. I am not disappointed with my choice. I calibrated using these setting I got from a friend for a different LG Plasma. I tweaked it to satisfy my eyes. You may need to do the same but I think these settings are a good starting point. Don't forget to make sure your cable box is properly set for HD viewing. Enjoy.
Settings used:
Aspect Ratio: Just Scan
Energy Saving: Off
Picture Mode: Expert 1
Contrast: 90
Brightness:60
H. Sharp: 30
V. Sharp: 35
Color: 48
Tint: 0
Now select Expert control
Dynamic Contrast: Off
Noise Reduction: Off
Gamma: Medium
Black Level: Low
Film Mode: On or off (I didn't see a difference between the two while watching cable TV)
Color Gamut: Wide
Edge Enhancement: On
Color Temp: Medium
Method: 20 Point IRE
Pattern: Outer
Select an IRE value i.e. 0 now move down and change the color settings. Go back up and select the next IRE value i.e. 5 then move down and change the color settings. Do this for all the IRE values. Yeah its a long and painful process but worth it.
r=red g=green b=blue.
0 ire r=-5 g=0 c=0
5 ire r=0 g=0 b=0
10 ire r=-16 g=0 b=-36
15 ire r=0 g=0 b=0
20 ire r=-17 g=-13 b=-34
25 ire r=-9 g=0 b=-37
30 ire r=-6 g=9 b=-29
35 ire r=0 g=0 b=-13
40 ire r=9 g=17 b=-25
45 ire r=0 g=0 b=0
50 ire r=-10 g=0 b=-42
55 ire r=-18 g=0 b=-10
60 ire r=15 g=20 b=-37
65 ire r=-18 g=0 b=0
70 ire r=5 g=30 b=-31
75 ire r=-9 g=9 b=-29
80 ire r=-6 g=19 b=-50
85 ire r=0 g=0 b=0
90 ire r=-8 g=16 b=-9
95 ire r=0 g=0 b=0
100ire r=-5 g=0 b=-24
Now go to the COLOR management:
Red Saturation 0
Red tint -1
Green Saturation -6
Green tint 0
Blue Saturation -8
Blue tint 0
Yellow Saturation -5
Yellow tint 11
Cyan saturation -2
Cyan tint -2
Magenta Saturation -3
Magenta tint -10
Now run the Picture wizard and adjust each setting in the picture wizard to your liking.
Hope you enjoy your TV with these settings :)
Settings used:
Aspect Ratio: Just Scan
Energy Saving: Off
Picture Mode: Expert 1
Contrast: 90
Brightness:60
H. Sharp: 30
V. Sharp: 35
Color: 48
Tint: 0
Now select Expert control
Dynamic Contrast: Off
Noise Reduction: Off
Gamma: Medium
Black Level: Low
Film Mode: On or off (I didn't see a difference between the two while watching cable TV)
Color Gamut: Wide
Edge Enhancement: On
Color Temp: Medium
Method: 20 Point IRE
Pattern: Outer
Select an IRE value i.e. 0 now move down and change the color settings. Go back up and select the next IRE value i.e. 5 then move down and change the color settings. Do this for all the IRE values. Yeah its a long and painful process but worth it.
r=red g=green b=blue.
0 ire r=-5 g=0 c=0
5 ire r=0 g=0 b=0
10 ire r=-16 g=0 b=-36
15 ire r=0 g=0 b=0
20 ire r=-17 g=-13 b=-34
25 ire r=-9 g=0 b=-37
30 ire r=-6 g=9 b=-29
35 ire r=0 g=0 b=-13
40 ire r=9 g=17 b=-25
45 ire r=0 g=0 b=0
50 ire r=-10 g=0 b=-42
55 ire r=-18 g=0 b=-10
60 ire r=15 g=20 b=-37
65 ire r=-18 g=0 b=0
70 ire r=5 g=30 b=-31
75 ire r=-9 g=9 b=-29
80 ire r=-6 g=19 b=-50
85 ire r=0 g=0 b=0
90 ire r=-8 g=16 b=-9
95 ire r=0 g=0 b=0
100ire r=-5 g=0 b=-24
Now go to the COLOR management:
Red Saturation 0
Red tint -1
Green Saturation -6
Green tint 0
Blue Saturation -8
Blue tint 0
Yellow Saturation -5
Yellow tint 11
Cyan saturation -2
Cyan tint -2
Magenta Saturation -3
Magenta tint -10
Now run the Picture wizard and adjust each setting in the picture wizard to your liking.
Hope you enjoy your TV with these settings :)
ไม่มีความคิดเห็น:
แสดงความคิดเห็น